Most drawers adhere to these general features, please read about item specific features in the item's description
Completely assembled and finished and ready to install
Manufactured to your sizes within 7 days of confirmation
Half-blind English Dovetails are exposed on the sides only
Dovetails are sanded smooth and finished after assembly (Pre-finished plywood and melamine drawers are not sanded smooth after assembly)
Dovetails are cut clean and fit tight with no tear-out
Heights are in 1 inch increments plus 1/4", such as: 4 1/4"
Standard heights are every inch from 2 1/4" to 18 1/4"
Bottoms are let in on all 4 sides 1/2" up from bottom edge
Bottoms are nailed with 5/8 brads sealed in with hot melt
Dado is precisely concealed within the dovetail joint
The top edges of both sides receive a smooth 3/32" radius
Only the inside of the front and back gets 3/32" radius
Top edge is square at the front and back for a tight connection to the face (does not apply to pre-finished plywood with microbevel or bullnose)
Sides are 1/8" lower than front and back for a clean joint on the top edge (when standard radius top edge is selected)
Available in any width up to 42" or depth up to 32"
Finished with 1 coat of sealer and 2 coats of catalyzed lacquer (outside of fronts and backs have sealer coat only unless specified)
Outside of box Tolerances are: +0, -1/32" for width, and +,- 1/16" for height and depth
*Not all features compatible with all materials and drawer types. Features above may change without notice. See product specific pages for more information. Every effort is made to make sure information on this site is accurate. Western Dovetail Inc. is not responsible for typographical errors.