Half-blind English Dovetails are exposed on sides only
Dovetail are sanded smooth and finished after assembly
Dovetails are cut clean and fit tight with no tear-out
Drawers sides are made with as few glue ups as possible
Bottoms are let in on all 4 sides (unless Staple is chossen)
Bottoms are nailed with 5/8" brads seal in with hot-melt (unless Staple is choosen)
Dado is precisely concealed within the dovetail joint
Tolerances are: +0,-1/32" for width, and +,- 1/16" for height and depth
Manufacturer
Western Dovetail, Inc.
Thickness
5/8"
Material Type
Solid Hardwood
Grade
Natural
Species
Soft Maple
Bottom Thickness
1/4", 3/8", 1/2"
Bottom Recess
1/4", 3/8", 1/2", Rabbet, Staple, Flush
Top Edge
Standard Radius, 1/32 Offset, Flush
Hardware Prep
TANDEM notched only, TANDEM notch and drill, TANDEM clips installed, Hettich notch and drill, Hettich clips installed
SKU
NSMP58-PO
Manufacturer's Suggested Retail Price
No
Use spaces to separate tags. Use single quotes (') for phrases.
Write Your Own Review
Only registered users can write reviews. Please, log in or register
General Information about Pull-Outs
P1) Basic pull-out
Standard drawer box using a premium front with 1/8" radius on the face
P2) Premium pull-out
Same as P1 but with 3/4" thick front
P3) Lip front pull-out
Same as P2 but with 3/8" lip on either side to conceal side-mount drawer slides. Drawer side does not include the lip, drawer depth is from face of front to back.
P4) Under-mount pull-out
For 1/2" thick sides only. Same as P2 but with 1/8" lip on either side. This causes the drawer to look the same with as a 5/8" drawer from the front.
P5) Deluxe under-mount pull-out
Same as P2 but with 3/8" lip at the bottom of the face to conceal under-mount slides from the front.
P6) Deluxe under-mount pull-out with lip
For 1/2" thick side only. Combination of P4 & P5 with 1/8" lip at sides and 3/8" lip at bottom.
Scoops
A) Ogee scoop
B) Crescent scoop
C) Shallow U scoop
D) Deep U scoop
Note : Custom scoops can be made from your drawing or template for an additional fee. Pricing may vary.
Tapered Sides
Tapered side pull-outs can have any height front and any height back up to 24".
