Pull-Outs: Pull-outs (also known as: roll-outs, slide-outs, sliding shelves, pull-out drawers, roll-out trays, etc…) are different than drawers since they usually don’t have a separate face added because they go inside the cabinet behind the doors. The face of a pull-out is integrated into the drawer itself and can have a number of different options for style and function. Choose from one of the preconfigured pull-outs for quick and easy ordering, or design your own using the configurable options. Pull-outs can have scooped fronts or tapered sides and can be designed to work with various types of hardware.
Standard drawer box using a premium front with 1/8" radius on the face
P2) Premium pull-out
Same as P1 but with 3/4" thick front
P3) Lip front pull-out
Same as P2 but with 3/8" lip on either side to conceal side-mount drawer slides. Drawer side does not include the lip, drawer depth is from face of front to back.
P4) Under-mount pull-out
For 1/2" thick sides only. Same as P2 but with 1/8" lip on either side. This causes the drawer to look the same with as a 5/8" drawer from the front.
P5) Deluxe under-mount pull-out
Same as P2 but with 3/8" lip at the bottom of the face to conceal under-mount slides from the front.
P6) Deluxe under-mount pull-out with lip
For 1/2" thick side only. Combination of P4 & P5 with 1/8" lip at sides and 3/8" lip at bottom.
Scoops
A) Ogee scoop
B) Crescent scoop
C) Shallow U scoop
D) Deep U scoop
Note : Custom scoops can be made from your drawing or template for an additional fee. Pricing may vary.
Tapered Sides
Tapered side pull-outs can have any height front and any height back up to 24".
